Replacing the brushes inside a
@foredomelectric flex shaft sent by
@down_to_the_wire_designs - “When my Foredom cut out the other day, I knew there was a good chance that the carbon brushes had worn down. When they’ve worn down to approximately a quarter of an inch it’s usually the optimal time for replacement. But it’s an easy fix! All you’ll need to do this simple repair is a new pair of brushes and a screw driver. Two quick notes: 1. Always unplug the unit before you begin 2. Brushes vary from model to model, so be sure to get the correct ones. “ thank you Chuck for sharing this with us! Maintenance on a flex shaft is an important! It’s wild to see the worn down one in comparison to the new one! They are tools that will last a lifetime with the proper upkeep ☺️ If you are reading this, I would love to share a tip from you! No tip is too simple to help another person! Please email me over at
tips@metalsmithsociety.com and be sure to like/save/comment on tips like these that are important care for our equipment ☺️
